郑州天顺食品添加剂有限公司

郑州食品添加剂网|河南食品添加剂生产厂家常年供应食品级食品添加剂!

全国服务热线 15003810456
您所在的位置:

氢氧化钾质量指标分析

来源:郑州天顺食品添加剂有限公司 发布时间:2022-10-31 12:50:34 关注: 0 次
标签: , , ,

1.碳酸盐:在含量分析中介于酚酞和甲基橙终点之间所耗的每mL 1mol/L硫酸,相当于碳酸钾138.2mg。
1. Carbonate: 1mol / L sulfuric acid consumed between the end points of phenolphthalein and methyl orange in content analysis, equivalent to 138.2mg of potassium carbonate.
2.重金属:取试样670mg,溶于5ml水和5ml稀盐酸试液(TS-117)的混合液中。加热至沸,冷却,用水稀释至25ml,后过滤。以此作为试样液,按GT-16方法测定。用含20μg铅离子的对照液(溶液A)。
2. Heavy metals: take 670mg of sample and dissolve it in the mixture of 5ml water and 5ml dilute hydrochloric acid test solution (ts-117). Heat to boiling, cool, dilute with water to 25ml, and then filter. Take this as the sample solution and determine it according to gt-16 method. With 20 μ G reference solution of lead ion (solution a).
3.水不溶物:5%试样水溶液应无色透明。
3. Water insoluble matter: 5% sample aqueous solution shall be colorless and transparent.
4.铅:取试样1g溶于5ml水和11ml稀盐酸试液的混合液中,冷却。以此作为试样液按GT-18方法测定。对照液中的铅离子量取10μg。
氢氧化钾
4. Lead: take 1g of sample, dissolve it in the mixture of 5ml water and 11ml dilute hydrochloric acid test solution, and cool it. Take this as the sample solution and measure it according to GT-18 method. The amount of lead ion in the control solution is 10 μ g。
5.汞:按CT-22方法测定。标准液和试样液按如下方法制备。
5. Mercury: determined according to ct-22 method. The standard solution and sample solution are prepared as follows.
(1)标准液的制备:按GT-22制各贮液和稀释液,使所得溶液每ml中含汞1μg。取该溶液1ml,放入-50ml烧杯,加水20ml、1:4稀硫酸溶液1ml和4%高锰酸钾溶液1ml。用表面皿盖住烧杯,煮沸数秒钟后冷却,备用。
(1) Preparation of standard solution: prepare each storage solution and diluent according to gt-22, so that the resulting solution contains 1% mercury per ml μ g。 Take 1ml of the solution, put it into a – 50ml beaker, add 20ml of water, 1ml of 1:4 dilute sulfuric acid solution and 1ml of 4% potassium permanganate solution. Cover the beaker with a watch glass, boil for a few seconds, cool and set aside.
(2)试样液的制备:取试样10.0g放入-100ml烧杯,加水15ml使之溶解,加酚酞试液(TS-167)2滴,在不断搅拌下用1:1稀盐酸溶液缓慢中和。加1:稀硫酸溶液1ml和4%高锰酸钾溶液1ml,用表面皿盖住烧杯,煮沸数秒钟后冷却,备用。
(2) Preparation of sample solution: put 10.0g of sample into – 100ml beaker, add 15ml of water to dissolve it, add 2 drops of phenolphthalein test solution (ts-167), and slowly neutralize it with 1:1 dilute hydrochloric acid solution under continuous stirring. Add 1ml of 1: dilute sulfuric acid solution and 1ml of 4% potassium permanganate solution, cover the beaker with a watch glass, boil for a few seconds, cool and set aside.
以上就是氢氧化钾https://www.tsswhg.com为大家介绍的内容,感谢您在百忙之中查看我公司的信息内容,如果您想要了解的更多,欢迎您来电进行咨询!
The above is potassium hydroxide https://www.tsswhg.com Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to call for consultation!

文章版权备注

文章版权归 郑州天顺食品添加剂有限公司 所有
文章链接:https://www.tsswhg.com/42047.html
未经授权,禁止任何站点镜像、采集、或复制本站内容,违者通过法律途径维权到底!